The Netgear EX6110 setup  is a compact WiFi range extender that boosts your existing network, ensuring wider coverage and faster speeds. It's easy to set up and works seamlessly with any standard router, enhancing your WiFi experience throughout your home or office.

How do I connect my Netgear EX6110 extender to my router?

• Plug in the EX6110 extender and wait for the Power LED to turn green.
• On your device, connect to the "NETGEAR_EXT" WiFi network.
• Open a web browser and go to mywifiext.net setup.
• Click on New Extender Setup and follow the prompts.
• Select your router's WiFi network and enter the password.
• Choose a name for the extended network and click Next.
• Connect your devices to the new extended network.

 Note:_ if you need any assistance regarding netgear wifi range extender so get in touch with our technician or visit the official website that is mywifiext.

How to connect Netgear WiFi extender using WPS?

• Plug in your Netgear extender and wait for the Power LED to stabilise.

• Press the WPS button on the extender.

• Within 2 minutes, press the WPS button on your router.

• Wait for the extender's WPS LED to turn solid green.

• If your extender has dual bands, repeat steps 2-4 for the second band.

• Once connected, the extender's Link LED will light up.

• Connect your devices to the extender's new network.

Netgear EX6110 wifi range extender login

• Plug in your EX6110 and wait for the Power LED to turn green.
• Connect your device to the "NETGEAR_EXT" WiFi network.
• Open a web browser and go to mywifiext.net.
• Enter the default username and password if prompted (usually admin/admin).
• Click Login.
• Follow the setup wizard to configure your extender.
• Save settings and connect your devices to the extended network.

Firmware update for netgear ex6110 extender

• To update the firmware for your Netgear EX6110 extender:
• Connect to the extender's network via your computer or mobile device.
• Open a web browser and go to mywifiext.net.
• Log in with your username and password (default: admin/admin).
• Navigate to Settings or Advanced > Firmware Update.
• Click Check for Updates.
• If an update is available, follow the prompts to download and install it.
• Wait for the extender to restart and complete the update.

How do I reset the netgear wifi extender?

To reset your Netgear WiFi extender:

• Locate the reset button on the extender (usually a small pinhole).
• Press and hold the reset button using a paperclip or similar tool.
• Hold the button for about 10-15 seconds.
• Release the button when the Power LED blinks off and then back on.
• Wait for the extender to restart and return to its default factory settings.
• Reconfigure the extender as needed by following the setup instructions.