A powerful Wi-Fi range extender, the Netgear EAX80 setup is made to enhance and grow your current wireless network. With its advanced features and capabilities, the EAX80 may be ideal for multi-device and multi-user families or businesses. This extender guarantees superior performance, increased capacity, and faster speeds even in congested networks because it supports the most recent Wi-Fi 6 technology. With its four strong outside antennas and beamforming technology, the EAX80 boosts signal strength and coverage across the whole area.

Netgear EAX80 Extender Setup using manual setps

 Steps for Netgear EAX80 Extender Setup using the manual method are below:

• The Netgear Eax80 WiFi Extender must first be plugged into a power source.

• Watch for the power LED to get solid.

• Any wirelessly enabled device can be connected to the network name (Netgear EXT).

• The client-led light on the WiFi 6 mesh extender will turn on as soon as you are connected.

• Next, open a browser and enter www.mywifiext.net into the address bar.

• It will take you directly to the page for the new extender setup.

• You must now adhere to the instructions displayed on the screen to finish the Netgear Nighthawk EAX80 Setup process. 

That is how you use their handbook to accomplish the NETGEAR Nighthawk AX8 EAX80 Wi-Fi Range Extender Setup. Contact our highly qualified staff if you continue to face any issues when connecting your WiFi AX8 mesh booster. They will assist you and help you save time.

Note: If you need any assistance regarding your mywifiext setup, get in touch with us via the chat button you see on the bottom right corner of this page.

How to Setup EAX80 via WPS Button?

• Plug In and Power On: Plug the Netgear EAX80 into a power outlet and turn it on.

• Locate WPS Button: Find the WPS button on the EAX80; it’s usually on the front or side.

• Press the EAX80's WPS Button: Press and hold the WPS button on the EAX80 until the LED indicators start blinking.

• Press the router’s WPS button: Within two minutes, press the WPS button on your existing router.

• Wait for Connection: Allow time for the EAX80 and router to establish a connection; stable LED lights indicate a successful setup.

Netgear EAX80 Setup Firmware Upgrade

Has your WiFi extender suddenly started acting strangely? Does the Netgear EAX80 WiFi range extender fail to deliver the necessary speed even after a good setup? If so, the Netgear Extender Setup should update its firmware automatically. The Netgear Extender Firmware consists of integrated hardware device instructions. In plain English, Netgear extender firmware may be thought of as an operating system created especially for the particular brand and model of the extender. Make sure the new firmware update is installed on your extender. The Netgear EAX80 firmware can be updated in the following ways:

• Activate your Netgear WiFi extender configuration first.

• Join a laptop, PC, or mobile device to the network of the extender.

• When finished, use your preferred method to open a web browser.

• In the Address Bar, type mywifiext.net and press the Enter key. 

• Press the Enter key in the Address Bar ,type mywifiext.net.

• Please sign in with your username and password to access your Extender.

• From the configuration menu, choose Firmware Update.

• After that, click the Review button.

• If there are any updated versions of the firmware, selecting Yes will update it.

• Now, let the Netgear EAX80 Extender Setup some time to properly update the firmware.

Common Issues While Netgear EAX80 Setup

The following are some typical problems that may occur when using the Netgear EAX80 extender setup:

• Website www.mywifiext.net cannot be accessed.

• Unable to connect to 192.168.1.250, the default IP address

• Wi-Fi signal strength is weak.

• A weak or incorrect wifi signal

• Not able to connect to this Network Ethernet Ext

• During setup, there are no blinking LED lights.

• Extender port setup problem

• Having trouble accessing or logging into the Netgear EAX80 extender setup page

• lacks a manual or instruction manual

• Lost or forgotten your Netgear EAX80 WiFi Extender’s administrator login information?

How to reset Netgear EAX80?

Have you forgotten or misplaced your administrator password? Arplace. Looking for the reset for the Netgear Nighthawk EAX80? If so, you are in the right place. We’ll explain how to perform a factory reset in the most straightforward manner in this blog. 

• Take a pen and a paper clip.

• Discover the Netgear EAX80’s factory reset button.

• You may have it at the bottom or in the back.

• Hold the reset button down for 8 to 10 seconds while pressing it with a pen or paper clip.

• The repeater will now restart once.

• After a reboot, your extender will return to its original factory settings.