It's a simple Netgear EX6140 extender Setup. First, make sure the extender is plugged into a power outlet that is close to your current WiFi router. After turning it on, join the WiFi network of the extender with your computer or mobile device. After that, launch a web browser and follow the prompts displayed on the screen to finish the setup procedure. Usually, this is just choosing your current WiFi network and providing its password. After setting it up, move the extender to a spot where it can best strengthen your WiFi signal and provide continuous connectivity across your house or place of business.  

Netgear EX6140 Extender Setup | WPS Method

• Close to your router, plug in the Netgear EX6140 extender.

• WPS button pressed.

• Press the WPS button for two minutes.

• Hold off until the extender's WPS LED solidifies, indicating a successful connection.

• If you have a dual-band router, repeat steps 2-4.

• Link your devices to the WiFi network that is extended.

• Place the extender so that it is as close to your router as possible.

• Your Netgear EX6140 will provide you with increased WiFi coverage.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is mywifiext

Netgear EX6140 WiFi Extender Setup | Manual Method

• Close to your router, plug in the Netgear EX6140 extender.

• Link a smartphone or PC to the WiFi network of the extender.

• Type mywifiext.net setup in the URL bar of an open web browser.

• After completing the setup, connect the extender to your current WiFi network by following the on-screen instructions.

• After connecting, move the extender to the best spot.

• Link your devices to the WiFi network that is extended.

• Let your Netgear EX6140 extender provide you with improved WiFi coverage.

Netgear EX6140 WiFi Range Extender | Firmware Update

• Link the Netgear EX6140 extender to your PC.

• Launch a browser, then go to mywifiext net setup.

• Enter the credentials from your extender to log in.

• Go to Administration or Settings.

• Choose Firmware Update and follow the steps on the screen.

• Await the extender's reboot and the completion of the upgrade.

• Try restarting your extender to ensure optimal performance.

How do I login to the Netgear EX6140?

• Use a device to create a WiFi connection with the Netgear EX6140.

• Enter mywifiext.net login in the URL bar of an open internet browser.

• Put the password and admin in here.

• To view the extender settings, click Log In.

• Adjust the parameters as necessary.

• When you're done, log out.

• Make sure you protect your login information.

Netgear EX6140 | Reset Process

1. Find the Netgear EX6140's reset button.
2. Hold down the reset button for five to ten seconds.
3. When the power LED begins to blink, release the button.
4. Wait for the extender's restart and factory reset.
5. Change the extender by following the first setup guide.